2013 hyundai genesis 3.8 oil filter location




2013 hyundai genesis 3.8 oil filter location

Article Navigation:
  • Photo
  • V6 - Step by Step DIY Oil Change - Hyundai Genesis Forum
  • Video
  • RELATED PAGES
  • As far as oil changes go, this car is pretty simple. What you'll need: • New Hyundai oil filter kit: • Hyundai - #C (all o-rings and crush.

    Part Number: SXL; Location: Oil Filter; Notes: Manufacturer recommends 7, miles oil change intervals with synthetic oil and extended life filter.

    Fact about hyundai! The Hyundai logo is not just the letter "H" in the aval. It would be too easy. This emblem symbolizes the handshake of two people - a representative of the concern and a satisfied customer. In addition, in Korean, the word "hyundai" is translated as "modern".

    Hyundai Genesis Coupe STP Extended Life Oil Filter, Part Number: SXL Vehicle Specific Part Number: SXL; Location: Oil Filter. See Store(s) With .

    2013 hyundai genesis 3.8 oil filter location

    2013 hyundai genesis 3.8 oil filter location

    Turning it counter-clockwise to remove it I set it aside on the fuse box to the right. WildBill's Garage Ku Fei. You could leave the front cowling and just remove the larger rear cowling, but I like to remove both so that while I am down under the car I can do a quick examination of the underside of the car to be sure nothing looks worn or out of the ordinary. Open the Hood How to pop the hood and prop it open.

    2013 hyundai genesis 3.8 oil filter location

    2013 hyundai genesis 3.8 oil filter location

    2013 hyundai genesis 3.8 oil filter location

    2013 hyundai genesis 3.8 oil filter location

    2013 hyundai genesis 3.8 oil filter location

    Oil & Filter Change Hyundai Genesis () - Hyundai Genesis L V6

    Professional Motorsports Amateur Motorsports. Vendor Classifieds Private Classifieds. Facebook Google Remember Me? Community Links User Tagging Statistics. WildBill's Garage Ku Fei. You will need the following tools: First, you need to carefully place your wheel ramps on a flat surface and proceed to slowly pull your car onto the ramps.

    It is helpful if you have a second person here to align and guide you on the ramps, but is not necessary. Second, be sure to place the car into 1st gear for manuals or park as well as pull the emergency brake to lock the front wheels. Finally, place your wheel chalks behind the rear wheels and make sure they are pushed firmly behind the rear tires. Your car is not secure and shouldn't move.

    2013 hyundai genesis 3.8 oil filter location

    This is important as you don't want your car to magically roll away while your under it for a number of safety reasons. Third, you are now ready to get started on the draining oil phase. You will need to first remove the plastic under cowling from the car. You could leave the front cowling and just remove the larger rear cowling, but I like to remove both so that while I am down under the car I can do a quick examination of the underside of the car to be sure nothing looks worn or out of the ordinary.

    Using your 10 mm deep socket wrench, remove the bolts holding the cowling. Be careful when you get down to the last 2 bolts as the plastic cowling will fall on your face if you do not hold it up while removing the last screws.

    2013 hyundai genesis 3.8 oil filter location

    Forth, locate the black aluminum oil pan located centered in between the two black frame mounts for the above drivetrain components and in front of the front axel and suspension components. Centered on the back side towards the transmission side of the oil pan is the oil drain plug. Using your 17 mm deep well socket wrench and a bit of force, pop the hold of the bolt until it will freely turn with your fingers.

    At this point, to minimize mess and clean up, remove the wrench and place the oil catch drain pan on the ground with the front lip of the circular oil drain pan just a hair towards the front to cover dripping when the oil is almost completely drained directly under the drain plug.

    Using your fingers, slowly and carefully loosen the drain plug until you can see oil start to leak out. At this point double check your oil drain pan placement as you don't want to spill any oil both environmentally bad and stains causing a pain in the butt cleanup.

    2013 hyundai genesis 3.8 oil filter location

    Now, quickly remove the drain plug and your hand from the oil stream and watch as the oil begins to drain. You should now give the drain process about 5 to 10 minutes to completely drain into the oil drain pan. Fifth, when the oil has completely finished draining and only rarely drips, it is now time to remove the oil filter. The oil filter is located towards the front left of the oil pan looking at the underside of the car from the front bumper.

    You will need your 27 mm standard socket wrench. Using the wrench and little bit of force, the filter should come loose.

    (How to) Hyundai Genesis sedan 3.8L 2013 ( Oil change )



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲